Portray vinyl partitions in a cell house is time-consuming and irritating due to the shiny floor and people blasted battens protecting the seams.
Older cell properties often have fake wooden paneling, so that they aren’t as irritating to color. However manufactured properties constructed after the early eighties are inclined to have partitions produced from panels of pressed gypsum with a shiny floor on one facet. The shiny floor is often produced from paper or vinyl.
Vinyl on gypsum (VOG) panels are utilized in cell properties as a result of it repels water, are reasonably priced, and are tremendous straightforward to put in. This coating, nonetheless, makes portray vinyl partitions in cell properties troublesome.
On this article, we’ll cowl the most well-liked choices to replace and paint vinyl partitions in cell properties. In case your cell residence has wooden paneling, you’ll wish to learn our information to wooden paneling in cell properties.
What are VOG wall panels and why are they utilized in cell properties?
VOG stands for Vinyl on Gypsum (or vinyl over gypsum). Gypsum is calcium sulfate dihydrate, a delicate and light-weight white or grey chalk-like mineral.
Vinyl on gypsum panels is usually 5/16″ thick with a shiny paper coating. They don’t have tapered edges, so installers use battens, or strips, to cowl the seams the place two panels meet. These battens are infamous throughout the cell residence world – most householders dislike them immensely.
VOG panels are used as a result of they’re light-weight, water-resistant, straightforward to put in, clear, and keep.
Beneath you may see the fashionable low-gloss vinyl wallboards utilized in a manufactured residence:
Fortuitously, trendy manufactured residence builders are starting to make use of completely different wall supplies. It could nonetheless be made with gypsum, however the high coating doesn’t have the excessive gloss coating or the shortly outdated patterns.
The Most Vital Step Earlier than you paint vinyl partitions in a cell residence
Portray is the best and most cost-effective technique to replace cell residence partitions. A single coloration, versus an outdated sample, can replace a room shortly.
Portray is particularly straightforward should you go away the battens, or strips, that cowl the seams alone and paint over them.
Right here’s the identical toilet proven above after the room was painted a stable coloration:
Information to Portray Vinyl Partitions in a Cellular House
Portray the vinyl-coated partitions in a cell residence is a little more troublesome than most notice. The shiny paper coating on the partitions requires extra preparation than a regular sheetrock wall.
Fortuitously, many cell owners have painted their partitions with nice success and we’ve collected useful recommendation and ideas from them. Right here’s the method they beneficial:
Step 1: Wash the Partitions
Paint and primer won’t stick with soiled partitions.
Smoke from cooking, dander from pets, and airborne particles from the furnace and air conditioner naturally stick with partitions so that you want a detergent or non-abrasive cleaner to get the partitions as clear as doable.
Each inch of the wall must be wiped with the cleansing agent, allowed to dry, after which wiped once more. Repeat if needed.
You need the primer and paint to bond to each a part of the wall.
Step 2: Use Excessive-High quality Primer and Paint
The suggestion we obtained most was to purchase the best high quality paint and primer you may afford.
The paint business constantly improves their recipes so chances are high you’ll discover an amazing primer and paint (or mixture primer+paint) should you stick with the better-known manufacturers. Ask your native residence enchancment retailer for the newest suggestion.
Sadly, higher paint know-how means greater costs so count on to spend at the very least $25.00 per gallon.
See the part beneath for high model solutions.
Step 3: Use Excessive-High quality Brushes and Rollers
Utilizing high-quality brushes and rollers is one other common suggestion from owners which have painted their cell residence partitions efficiently.
Excessive-quality brushes and rollers switch the paint to the partitions higher and provides a extra uniform end which is strictly what you want.
Step 4: Use A number of Mild Coats
All portray professionals will inform you that it’s higher to color partitions in a number of mild coats as a substitute of 1 or two heavy coats. This enables the paint to dry quicker and the end will probably be extra uniform and easy.
Above is a picture of two mild coats of Kilz Primer finished by Geneva at MyHeartsSong.com.
Further Info that Can Assist
Understanding which firm manufactured your private home’s VOG panels will enable you decide their beneficial paint and primer. Sadly, not all owners have entry to that data so a bit of guessing is required.
CDS, a big VOG producer, recommends an oil primer with two coats of alkyd or latex semi-gloss enamel paint:
- Two coats of alkyd or latex semi-gloss enamel.
- Oil primer with a end coat of oil paint or flat latex.
- Two coats of flat oil paint.
Different gypsum board producers have launched their very own suggestions and ideas:
- Decrease sheen paints bond higher than gloss or semi-gloss paints.
- An acrylic based mostly primer ought to work nicely in most cell properties.
- Utilizing a great high quality primer helps decrease coloration and floor variations and gives a extra uniform profile for any floor protecting (supply).
- Apply a high-quality latex primer/sealer appropriate with the completed product previous to ornament (supply).
- A very good high quality, white, latex drywall primer formulated with greater binder solids, utilized undiluted, is usually specified for brand spanking new gypsum board surfaces previous to the appliance of texture supplies and latex wall paints. An alkali and moisture-resistant primer and a tinted enamel undercoat could also be required underneath enamel paints. Seek the advice of with the end paint producer for particular suggestions (supply).
Associated: Create an Superior Gallery Wall for Much less Than $50!
High Paint and Primer Suggestions for Vinyl Partitions in Cellular Houses
Selecting which primer and paint (or mixture product) to make use of on your cell residence partitions might be the trickiest a part of the entire job. Go to three completely different paint shops and you’ll hear 3 completely different opinions.
Beneath is a listing of merchandise which have labored nicely on cell residence partitions (they’re listed in no specific order) based mostly on bloggers and readers which have had nice outcomes when portray vinyl partitions in cell properties:
Greatest Primers to Use on Cellular House Partitions:
- Kilz Primer
- Zinnser 123
- Gliddin Gripper
- Xium Uma
- Valspar Bonding Primer
Greatest Paint Manufacturers for Vinyl Partitions in Cellular Houses
- Behr Premium Plus Extremely
- Glidden Efficiency Edge Fill + Prime + Paint
- Sherwin Williams
Paint, Wainscoting, and New Trim
The homeowners from the picture above painted the partitions, added wainscoting on the decrease third of the wall, and changed the factory-installed battens with 1″ trim. This provides the area an entire new look with out the effort of eradicating the battens.
Associated: Utilizing Accent Partitions in Your Cellular House
Conclusion
Many individuals have painted, textured, and papered their vinyl partitions in cell properties and you’ll, too!
The trick is to get the very best bond doable and that’s made doable by cleansing the partitions nicely and utilizing a great primer.
As all the time, thanks a lot for studying Cellular House Residing!
